What machines can be used for making fertilizer powder?

The new type vertical crusher has a wide rang of raw materials, such as organic fertilizer, bio-organic fertilizer, compound fertilizer, etc. The crushing process uses high-strength wear-resistant carbide chains, blades, and vertical heads with synchronous speeds. The feed inlet of the crusher is reasonably designed, the crushed materials are uniform, and the material with large moisture content is not easy to stick to the wall. The new type vertical crusher can grind raw materials with moisture content of 20% to 50%. Therefore, this machine is preferred equipment for grinding raw materials.

The new type of crusher can be widely used as one of the equipment for crushing organic fertilizer. The machine uses a high-strength wear-resistant hard alloy chain with a synchronous speed in the crushing process, which is suitable for crushing raw materials and returned materials. It has strong adaptability to materials with high moisture content, and should not be blocked. The material is discharged smoothly. The material enters from the feed port and collides with the high-speed rotating chain in the casing. After the impact, the material is squeezed and broken, and then hit to After the inner wall of the casing hits back, it collides with the chain again, so that after several hits during the fall, it turns into powder or particles below 3mm and is discharged from the lower part.



What Improvements have Our Engineers Made to the New Type Vertical Grinding Machine?

①　After technical improvement, the configuration and quantity of hammers have been improved, so that the material crushing effect is better. The angle setting of the feed inlet is improved, so that the material at the feed inlet no longer sticks.

②　The outlet setting has been improved, and the air outlet has been increased. When the dust is large, the dust can be removed to reduce the dust pollution in the production workshop. 

③　The degree of vertical crusher machine for fertilizer can also be adjusted within a certain range according to user needs. It has a grinding effect on hard materials such as glass, ceramics, bricks, crushed stones and so on in the organic fertilizer of municipal solid waste, and achieves the effect of safe use. This machine shortens the process flow, reduces equipment investment, and saves operating costs for organic fertilizer and compost production. It is an ideal machine for fertilizer production and processing units.

④　The motor drives the main shaft to rotate. The main shaft has two upper and lower bearing seats, which are installed on the upper and lower ends of the casing. The casing assembly is installed on the lower frame, the main shaft is equipped with a rotor disk and a chain, and the feeding hopper is on the upper part of the casing. In order to facilitate the loading and unloading of the hammer, the casing is opened with a valve for easy disassembly and maintenance.

Top 3 Design Technical Highlights of New Type Pulverizing Machine



It has strong adaptability to materials with high moisture content, is not easy to be blocked, and the material is smoothly discharged.

Our engineers use special materials when designing the crushing blade, which has a service life that is three times longer than that of similar products.

Our crusher has high crushing efficiency and is equipped with an observation window, which can be completed within ten minutes to replace the wearing parts.

What Should be Paid Attention to when Using this Machine?

1. The use of fertilizer crusher machine should be installed on a level concrete foundation and fixed with anchor bolts.

2. Pay attention to the verticality between the main body and the horizontal when installing.

3. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is tight. If there is looseness, please tighten it.

4. Configure the power cord and control switch according to the power of the equipment.

5. After the inspection is completed, a no-load test run is performed, and the test run is normal and production can be started.

Our fertilizer factory machine has developed and designed other fertilizer grinding machine, when you want to read more, you can click the following website. https://www.fertilizerfactorymachine.com/fertilizer-crusher-machine/

Email: info@fertilizerfactorymachine.com

Mobile Phone: +86 180 3757 2883

Comments

Post a Comment

Popular posts from this blog

How to choose NPK fertilizer equipment to roll extrusion granulator?

Image
Now the environmental protection inspection is more and more strict. The dryer equipped in NPK fertilizer production line needs fuel, but now it is forbidden to burn some fuels, such as coal combustion, and the roller extrusion granulator can omit this link. Due to the relatively low moisture requirement of the roller extrusion granulator, which is about 20%, it can be dried naturally after molding. Customers can directly avoid the drying process after granulation, and can be directly packaged for sale. The double roll extrusion granulator mainly belongs to the extrusion sliding model. The working principle is that the belt and pulley are driven by the motor and transmitted to the two output shafts of the reducer through the reducer, and each output shaft drives the two grinding rollers to do the opposite work through the coupling. The materials are added from the feeding hopper, demoulded and pelletized by double axis extrusion, and then transferred to the The crushing chamber is use...
Read more

What is the Windrow Compost Turner?

Image
Windrow fermenting equipment produced by  FFM Heavy Industries   is a kind of large-scale stacker, with full hydraulic fermentation system, tie rod steering wheel operation, crawler walking, sturdy and durable, strong power, large output, strong turning and throwing ability, turning and throwing cold cylinder hydraulic pressure Lifting adjustment, high degree of automation, simple operation and easy to master. It is a professional windrow turning equipment for aerobic fermentation of organic materials into organic fertilizer. The ground stacking fermented chess style is currently the most economical fertilizer model for civil engineering and human resources. The materials need to be piled in long strips. The material is shaken and broken by the turning machine at regular intervals, and the organic matter is decomposed under aerobic fermenting conditions . It has the function of crushing, which greatly saves time and labor, greatly improves the production efficiency and produc...
Read more

What is the working principle of new type organic fertilizer granulator?

Image
  The new type fertilizer granulator is one of the special equipment for organic fertilizer granulation. Because the internal structure is composed of many neatly arranged agitating teeth like a spiral, it is also called an internal rotating agitating tooth granulator. This machine is also suitable for Many raw materials with high water content are granulated, so it is also called wet granulator, which is widely used in the granulation of organic fertilizer raw materials. Due to the high granulation rate, stable operation, sturdy and durable equipment, and long service life, it is selected by the majority of users as the supporting product of the organic fertilizer production line. The stirring teeth type of pelletizer developed and produced by our unit has a variety of specifications, and we can also develop and produce other specifications of the stirring tooth granulator according to user requirements. The shell of the organic fertilizer granulator is made of thick seamless ste...
Read more